IPC Header

New Releases from IPC Training

Click on links below for free complete online previews. Free paper-based testing or automated
e-testing included with most programs.

DVD-180C - Component Level Defects / Acceptance Criteria from IPC-A-610F Explain the critical component level defects from IPC-A-610F, with this simple and cost effective trainer-assisted video from IPC. Your choice of standard or hi-definition / Blu-ray format, part # DVD-180C-BD-K (includes free standard definition DVD with purchase). Requires Blu-ray DVD player. Also available as OVT-180C for automated training and testing over your Learning Network or LMS. For single-student, single-use purchase, go to EDGE, the IPC Learning Portal.

DVD-145C – Basic SMT Rework - Without Component Removal Part 2 in SMT Rework Series (for Part 1, see DVD-144C, below.) Demonstrates industry-approved rework procedures that do not require component removal – using a hand soldering iron and solder removal tools – for chips, gull wings and J-lead components. Your choice of standard or hi-definition / Blu-ray format, part # DVD-145C-BD-K (includes free standard definition DVD with purchase). Requires Blu-ray DVD player. Also available as OVT-145C for automated training and testing over your Learning Network or LMS. For single-student, single-use purchase, see EDGE-145C, on the IPC Learning Portal.

DVD-168C - Torque Training for Electronics Assembly The ultimate primer for anyone who tightens a fastener in electronics assembly. Begins with torque theory, and common measurements. Explains proper usage and calibration of manual and power tools. Details tolerances, and highlights improper techniques and practices that can create failures / unreliable products. Your choice of standard or hi-definition / Blu-ray format, part # DVD-168C-BD-K (includes free standard definition DVD with purchase). Requires Blu-ray DVD player. Also available as OVT-168C for automated training and testing over your Learning Network or LMS.

DVD-179C – Handling Moisture Sensitive Devices An updated version of the earlier 79C training program, can save your company time and money in preventing component malfunctions. Shows why moisture accumulation is a problem for MSDs, then explains the materials and techniques that can be used to offset humidity exposure in a factory environment. Also demonstrates proper handling techniques that can prevent popcorning and component failures during solder reflow. Also available as OVT-179C for automated training and testing over your Learning Network or LMS.

DVD-144C – Hand Soldering/SMT Component Installation
Shows the best way to install surface mount components manually – using a standard hand soldering iron. Covers Chip Component installations; Gull Wing Components; and J-Leads in both Tin-Lead and Lead Free applications. Your choice of standard or hi-definition / Blu-ray format, part # DVD-144C-BD-K (includes free standard definition DVD with purchase). Requires Blu-ray DVD player. Also available as OVT-144C for automated training and testing over your Learning Network or LMS.

 

CIS Preparatory Courses

Do you have potential CIS candidates without the necessary foundational knowledge to understand all the technology / terminology of any one of the following IPC certification programs? IPC has assembled a collection of optional video preparatory courses that can help students successfully achieve their CIS credential for these IPC standards…

DVD-PREP-A610F – Preparatory Course for IPC-A-610F CIS Certification 

DVD-PREP-J001F – Preparatory Course for IPC-J-STD-001F CIS Certification 

DVD-PREP-A620B – Preparatory Course for IPC-A-620B CIS Certification 

DVD-PREP-7711-21B – Preparatory Course for IPC-7711-21B CIS Certification

 

DVD-196C – Area Array Rework
Learn best industry practices for area grid array rework. Removal and replacement procedures for BGAs and QFNs. Covers site prep, reballing, alignment, solder paste, thermal profiles and more. Includes common defects and inspection techniques. Your choice of standard or hi-definition / Blu-ray format, part # DVD-196C-BD-K (includes free standard definition DVD with purchase). Requires Blu-ray DVD player. Also available as OVT-196C for automated training and testing over your Learning Network or LMS.

DVD-71C – IPC-A-610F Common Inspection Errors
Save your company time and money – by eradicating the most common inspection errors using the A-610. Such topics as: Inspector responsibilities, board-side criteria, minimum electrical clearance, wetting angles, vertical fill, and more.

Also available as OVT-71C for automated training and testing over your Learning Network or LMS.

DVD-142C – Introduction to Hand Soldering
Our two best hand soldering videos combined into one comprehensive program.  Covering all the basics of soldering for through hole components for both tin-lead and lead free solders.  Shot in all new hi-definition footage with best industry practices as demonstrated by PACE’s Chris Barrett. Your choice of standard or hi-definition / Blu-ray format, part # DVD-142C-BD-K (includes free standard definition DVD with purchase). Requires Blu-ray DVD player. Also available as OVT-142C for automated training and testing over your Learning Network or LMS.

DVD-172C – FOD (Foreign Object Debris / Foreign Object Damage) Prevention in Electronics Assembly
It’s everyone’s responsibility to ensure that all assemblies are built free from FOD – not only for the economic health and reputation of your company, but for the safety and reliability of the final products delivered to your customers. This training video provides the information and techniques to help eliminate FOD during electronics assembly, hand soldering, SMT & PTH assembly processes, as well as during box build and wire assembly. Your choice of standard or hi-definition / Blu-ray format, part # DVD-172C-BD-K (includes free standard definition DVD with purchase). Requires Blu-ray DVD player. Also available as OVT-172C for automated training and testing over your Learning Network or LMS.

DVD-166C – Counterfeit Components
Explains how counterfeit components find their way into the supply chain and why they are an increasing challenge for the electronics industry. It is essential that inspection technicians, as well as stockroom and production personnel, and have an understanding of the common visual indicators of substandard components – to help catch counterfeit parts before they can be assembled into your product. Your choice of standard or hi-definition / Blu-ray format, part # DVD-166C-BD-K (includes free standard definition DVD with purchase). Requires Blu-ray DVD player. Also available as OVT-166C for automated training and testing over your Learning Network or LMS.



Online Video Training (OVT) Resources

IPC Training now offers two options for computer-based video training with automated testing and certificates:

1.) IPC Web-based – Our entire Assembly Library of video training and automated testing programs is now available through the IPC Training website. Purchase a one-year license for unlimited internet access to all of our assembly programs. All you need is an internet connection, web browser, and a single, unique company ID and password for all your students. Part # OTL-LBR-OL.

2.) Our popular OVT Format includes video training with built-in automated testing, scoring and certificate generation capability. Runs over your Learning Network, includes optional automatic email notification, and is also SCORM-compliant for use within a Learning Management System or “LMS.” Available in Site (single facility) or Global (multi-site) Licenses.

OVT-180C - Component Level Defects / Acceptance Criteria from IPC-A-610F

OVT-145C – Basic SMT Rework – Without Component Removal

OVT-168C - Torque Training for Electronics Assembly

OVT-179C - Handling Moisture Sensitive Devices

OVT-144C  Hand Soldering / SMT Component Installation

OVT-196C  -  Area Array Rework

OVT-71C IPC-A-610F Common Inspection Errors

OVT-142C – Intro to Hand Soldering

OVT-172C – FOD Prevention in Electronics Assembly

OVT-166C – Counterfeit Components



CIS Multi-Video Prep Courses in OVT Format

New CIS preparatory courses are also available in the OVT format, for your learning network or LMS.

OVT-PREP-A610F – Preparatory Course for IPC-A-610F CIS Certification

OVT-PREP-J001F – Preparatory Course for IPC-J-STD-001F CIS Certification

OVT-PREP-A620B – Preparatory Course for IPC-A-620B CIS Certification

OVT-PREP-7711-21B – Preparatory Course for IPC-7711-21B CIS Certification

 

 Alternate Language Releases

Multi-Language (with English) DVD training programs.

DVD-SP74C - Spanish – ESD Control for Electronics Assembly

DVD-SP64 - Spanish – Component Identification

DVD-SPPTH-E - Spanish – Through Hole Solder Joint Workmanship Standards

DVD-SPSMT-E - Spanish – Surface Mount Solder Joint Workmanship Standards

DVD-SP18C - Spanish – Soldering Terminals

DVD-CH8 - Chinese – Print Reading for Electronics Assembly

DVD-FR15C - French – Soldering Iron Tip Care

 

v.3